Pages

Tuesday, April 5, 2016

24

DIY Ring & Earring Jewelry Organizer

I have a mega crush on DIY'ing organizational solutions and storage.  I don't know what it is, but I just love coming up with custom creations to our everyday problems.  I have always had an interest in high-end and beautiful storage, however, I don't typically have the budget for it.  So, I try to recreate organizers in our home for a fraction of the cost as trendy or inspirational pieces.  Sometimes I knock it out of the park, sometimes I get it "good enough", sometimes I spend the same or more as buying from the store (but still gain something custom), and sometimes I completely biff it.


The goal is always the same, however.  To create something I love, while trying to save a bit-o-change.  But if you ask me, the very best part of DIY'ing is that you can customize your project to your specific needs.

I am going to admit, Cassie's recent jewelry display post put me over the edge to finally tackle a project that has been on my list for quite some time now.  I am a chronic earring stud loser, and although I can't guarantee this solution will help with that problem, it will give me an organized place to put them away each day.  

I don't wear a lot of jewelry, but earring studs and bracelets tend to be my favorite pieces to rock on a daily basis.  The storage I am sharing today was a perfect solution for my ear candy, yet it would also work beautifully for rings as well.  I just realized while shooting these photos that I don't have a single ring beyond my wedding bands (and my class ring which is packed away), that I own or wear.  Is that weird?

Moving on....

For this project I gathered a few supplies, some I already had, others I found at a local craft store.




Additional tools that were helpful for this project:




I have been wanting a nice way to organize and display my earring studs, but I also know that if I were to cover them up with a lid, I might not be as likely to put them away.  So I removed the lid of the unfinished wood craft box I purchased.



Any box would work for this project, however.  Think shoe box lids and decorative boxes you pick up from your travels... Getting creative is so much fun!

I had ordered the gift wrap shown above to use with a gift for my niece.  I had a few extra sheets and knew this was the perfect way to preserve the loveliness!  


I am often asked for specific steps while wrapping boxes in gift wrap or fabric.  Honestly, it always seems to go a little bit different than I think it will.  I just take it one step at a time, cutting small slits and wrapping around the perimeter in a way that seems to make the fewest amount of seams. #seewhatididthere


This paper was perfect because the pattern was really organic and forgiving.  I did learn that I probably should have sanded the top edge of the box smooth prior to affixing the paper with decoupage, as there were some minor bumps that came through.  

I used Martha Stewart's decoupage as I have been preferring it over Mod Podge (I am not being paid by Martha but just might secretly wish that I was).  I found that if I had any crazy bubbling action, that it was because I had applied too much decoupage below the paper.  A small pin sized hole would help fix that problem, as does applying below the paper and letting it dry completely before applying any to the top of the paper.  Also, less is definitely more.


Once I made my way around the entire box, I let it dry for a full day.

While the box was drying, I measured the inside to determine the length I needed to mark and cut my dowels.  I used our small miter box/saw to trim the dowels down to size.


I also used the same measurement to determine the size to cut the felt pieces.


I was able to get two identical cuts from each sheet of felt, and repeated the pattern until I had enough cut for each dowel.


I then used my hot glue gun to affix the dowel to the felt.  I started by adding a strip of glue to the edge of the cut felt, placing down the dowel, rolling the dowel and felt tightly together, and finishing with another strip of hot glue.


I found the white felt to be a bit too stark, so I proceeded to roll each piece with some scrap linen for a more finished effect.



I forgot to snap a photo of this step, but as soon as the box had dried for a day, I placed a single (very thin) coat of water-based poly over the paper.  This provided an added layer of protection and a slightly glossy finish.

I didn't want the rolled fabric/display to be on the floor of the box, so I used some extra scrap dowels and hot glue to create a raised ledge on two sides.


Then, I just popped the dowels into the box and pressed down firmly.  I found that the dull edge of a utility blade was helpful in tucking in each end of the fabric wrapped dowel.


It didn't take long to realize my mistakes with the first fabric choice.  First, I should have ironed it, because the wrinkles became more obvious as I went.  And really, linen isn't very forgiving, especially light colored linen.  Secondly, I should have cut the fabric slightly longer on each end of the dowel, to be sure there were no rough or visible edges.  

With those lessons learned, I removed the linen and re-rolled each dowel of felt with a slightly thicker ivory fabric that I ironed in advance.


This time I also cut the fabric a smidge longer than the dowel, and used the blade to tuck everything in nice and neat as I went.  


So darling right?


As I placed the new organizer on my dresser in my closet, I realized that I have DIY'd almost all of my jewelry storage. #hooray!  I started with a cork board wrapped in linen fabric paired with pushpins for my necklaces, a bracelet organizer made from a paper towel roll, and now this sweet little earring box!




I also ordered a package of extra earring backs that I placed into a cosmetic container and store in my nearby makeup drawer.  I find these smaller, rubber backs stay on my studs and prevent them from falling out of my ears.


After store coupons, I purchased about $10 worth of materials to work on this project, and was able to utilize tools and materials I had on hand as well.  The best part is that this project is completely customizable with different box types, fabrics and decorative papers.  And it can be used for rings or earrings, a double whammy win!


I can't wait to start scheming another DIY storage solution soon!  I am beginning to think that taking the time to craft and create thoughtful storage is my favorite part of our organizing projects.  It adds such a fun and creative element, as well as a bit of motivation!

Did Cassie inspire you to mix up your jewelry display and storage as well?  Or, have you been putting pretty gift wrap to good use around the abode? If so, tell me about it below!  



**  U P D A T E  **
If this is something you love but don't want to take the time to make it yourself, I found this similar option at The Container Store here.

24 comments:

  1. Wow! Absolutely brilliant! I am completely crushing on your small mitre box too. (I think you should get paid by Martha.)

    ReplyDelete
  2. Absolutely fabulous! I want and need one!

    ReplyDelete
  3. I have been looking for an earring organizer like this forever but they all seem to only have a small section for earrings. I love this and plan on making one this weekend!

    ReplyDelete
  4. That looks great! Looks like something my teenage daughter would enjoy using, and probably making too. Thanks for sharing.

    ReplyDelete
  5. Do the earring backs stay on or do you store them separately?

    ReplyDelete
    Replies
    1. Hi Lisa! They stay on, I just push them all the way up to the earring. The organizer has a little give so the backs stay in place. :)

      Delete
  6. This is just what I needed. I made a place to hang my Euro wire type earnings ( a medium-sized mesh screen over a wood frame) but all my studs are still in the drawer, where I forget them. Now I can display them where I can see them thank you so much for sharing your idea!

    ReplyDelete
  7. It's exactly what I need. My jewelry mess drive me crazy. You detailed post made me happy.

    ReplyDelete
  8. Love it! Looks so simple yet gorgeous! This is the moment where I´m sad that I don´t wear earrings anymore! Although it would be perfect present to make also! ;)

    Eneli
    Beauty - Travel - Lifestyle
    Do-Dolce Blog
    & Bloglovin

    ReplyDelete
  9. Gorgeous!
    I love how while your projects are always PERFECT, you showed us the step that wasn't and had to be redone- not making it seem simpler than it was.
    Great paper choice!

    ReplyDelete
  10. I'm SO inspired!! I've already got everything I need. Thanks!!

    ReplyDelete
  11. What a cute project! And I love the pink marble!

    -Jen
    www.asipofbliss.com

    ReplyDelete
  12. This project is just what I needed! I've been so frustrated with how expensive most jewelry organizers are and I can't seem to find one that will actually fit into the spaces I have. Solution! Make my own! Thanks so much for sharing this awesome walk through.

    http://classicsidewalk.com

    ReplyDelete
  13. Great job! I made a cheaper version of this last year and posted a tutorial on it, but now that my earring and ring collection has grown, I'm going to give this a shot! It seems like a wonderful, professionally-made piece!

    http://www.shehlagrr.com/2015/04/diy-ring-boxorganizer.html

    ReplyDelete
  14. This is SUCH a cute idea for organizing earrings!

    likelybysea.com

    ReplyDelete
  15. This is such a cute idea! I may have to try it for my girls! :)

    ReplyDelete
  16. I love this DIY- I definitely need to try it. It is so efficient and easy- not to mention adorable. I am notorious for not putting my earrings away. I love all your jewelry storage and I definitely need to step mine up!

    ReplyDelete
  17. I was just thinking I need more storage for my rings. Hmm I could probably make that, so I checked in on my friends on Pinterest and your idea is just what I'm looking for. Can't wait to put it together. Thanks

    ReplyDelete
  18. I understand that you cut the felt the length of the dowel to fit the width of the box. But, how did you determine how much felt to roll onto the dowel so that it was not too chunky to fit nicely into your box?

    ReplyDelete
    Replies
    1. Hi Carla!

      For the felt - I just rolled it around the dowel a couple of times and then marked and cut accordingly, and then followed the same size/cuts for the remainder so they would all be about the same size. The felt has give, so I just went until it felt too tight to add one more.

      Delete
  19. just made one (without covering the wood box) and I LOVE it! thanks for the idea!

    ReplyDelete
    Replies
    1. Oooh! I bet one of these in a simple wood box would be gorgeous! Thank you for sharing!

      Delete
  20. love this! going to make one of my own so i can finally see my whole collection

    ReplyDelete

Thank you so much for taking a moment to join in on the conversation! I read and appreciate each and every comment, however, I will remove any comment that I believe to be inappropriate, malicious, or spam-like. I would love for this comment section to be used as a place to engage in purposeful dialogue, I only ask that everyone remains constructive and considerate.

All comments will be moderated and may take a moment to appear.